Most individuals nowadays utilise WiFi, as you may be aware. And nearly everyone is aware of it. There are, however, a number of issues that you may face in this regard. One of the issues is that the IP configuration is invalid.
Many users who use WiFi networks are likely to encounter this problem. In either case, an error notice about the same displays up on your screen, either when you are logging into your PC or when you are using WiFi and it abruptly stops working..
It’s a common problem for Windows 10 users, and it may be a problem for you if you’ve just loaded updates to your system.
Check the internet connectivity of other devices linked to the WiFi network as well. In this case, if all of your other gadgets are operating and connecting to the WiFi, you should proceed. The problem may be with your router or Internet service provider if no other devices are able to connect to the WiFi.
Many factors can contribute to the occurrence of this issue. If you’re not acquiring an IP, it’s possible that malware is interfering with your system’s ability to connect.
Wi-Fi Configuration Failed: What Should I Do?
There are a number of reasons why this might occur, and there are a number of remedies that you can learn and follow. Restarting your computer before going through and executing the solutions, however, is recommended.
“WiFi” does not have an IP configuration error can be fixed using the following solutions:
Method 1: Do a Clean Reboot.
Step 1: Press and hold the Windows key while pressing R to perform a fresh reboot.
Step 2: Next, type MSConfig into the box and hit the Enter key.
Step 3: Click on the Services tab to continue.
Step 4: Check to see if All Microsoft Services are hidden and then disable them all.
Step 5: Afterwards, pick Open Task Manager from the Startup menu and then click on the Start button.
Step 6: From the first to the last item on the list, disable them all.
Step 7: Click OK to close the current window.
Step 8: Restart your PC to complete the process. A clean boot state will be immediately loaded.
Method 2: Install the most recent version of drivers.
For this solution to work, you must first download the latest driver for your device and then uninstall the network drivers to determine whether they are causing your WiFi to display an error message about an invalid IP address.
Step 1: The first step is to press the Windows key and R simultaneously.
Step 2: Once you’ve entered the command, press the Enter key on your keyboard.
Step 3: Locate and double-click on the Network Adapters option.
Step 4: Double-click on your network card.
Step 5: Next, go to the Drivers tab and click on the Update Drivers button.
Finally, select Search automatically for updated driver software and follow the on-screen instructions.
Method 3: Drivers of Rollbacks
Here are the actions you need to take to implement this solution:
Step 1: Once again, you’ll need to hold down the Windows key and press R to get to the next step.
Step 2: Once you’ve entered the command, press Enter to go to the next step.
Method 4: Locate and double-click on the Network Adapters option.
Step 1: Double-click on your network card.
Step 2: After that, pick the Driver tab, click Roll Back Driver, and try to follow the onscreen instructions.
It is not possible to roll back drivers if the Rollback Driver option is greyed out, as described in Step 6.
Method 5: Drivers should be uninstalled.
Uninstall the drivers and restart your computer, which will prompt Windows to install the necessary drivers and help you fix the problem.
Step 1: The first step is to press the Windows key and R simultaneously.
Step 2: Next, type devmgmt.msc into the box and hit Enter.
Step 3: Next, look for and double-click Network Adapters in the left pane.
Step 4: Once more, locate and double-click on your network card.
Step 5: Click on the Driver tab and then click Uninstall to complete the uninstall process. Keep an eye on the screen for any and all instructions that may appear.
Step 6: Uninstalling the drivers from your PC is the final step. Restart your computer.
Method 6: Uninstall or disable Antivirus software
It’s possible that your computer’s antivirus software is to blame for the problem. Antivirus can be disabled or removed from the PC to determine if it is causing this problem or not.
Step 1: In the beginning, you need to right-click the anti-virus icon.
Step 2: To disable, click on it. Otherwise, you can disable your anti-virus application from the main menu if you can’t find the option there already.
Following these instructions will also help you get rid of any unwanted programmes on your computer.
Step 1: The first step is to press the Windows key and the R key simultaneously.
Step 2: Press the Enter key on your keyboard to type in appwiz.cpl and hit Enter.
Step 3: Afterwards, locate your Antivirus software and click on it in the list.
Step4: The final step is to click on Uninstall and follow the on-screen instructions.
Step 5: Restore the default settings of the Windows Firewall
You might also give this solution a shot to see if it helps fix your problem. Windows Firewall can be reset to its default settings to see if that helps.
Step 1: Press R while continuing to hold down the Windows key.
Step 2: Enter firewall into the search bar.
Step 3: When you’re done, type cpl and hit Enter.
Step 4: Afterwards, pick the Restore Defaults option and then click the Restore Defaults button.
Step 5: The final step is to click on YES if it asks for your permission.
Method 7: IP Addresses can be released and renewed.
By releasing and renewing your IP address, you can also remedy this problem. Try to follow the following steps in order to execute this solution:
Step 1: Pressing the Windows key is the first step.
Step 2: To find the command prompt, type cmd into the command prompt search box, or search for Powershell and then type cmd into the command prompt.
Step 3: Right-click it and choose Run as administrator. ‘
Step 4: Enter the command ipconfig /release and press enter.
Step 5: To renew your IP address, run ipconfig /renew and click the enter key once more.
Step 6: Press the Enter key to bring up the Exit menu.
Once you’ve done so, you can see if the problem with your WiFi connection has been resolved.
Method 8: Reset the TCP/IP Stack (if applicable)
Resetting the TCP/IP stack can fix the problem of an incorrect IP setup. In order to accomplish this, you’ll need to run three command prompt commands. This solution can be implemented by following the following steps:
Step 1: Pressing the Windows key is the first step.
Step 2: Type cmd in the search box and press Enter.
Step 3: Right-click on the Command Prompt option and select Run as Administrator.
Step 4: After typing netsh winsock reset catalogue, hit the enter key to complete step 4.
Step 5: Once more, enter netsh int ipv4 reset reset in the command line.
Step 6: Enter the following command by pressing the Enter key.
Step 7: Next, type netsh int ipv6 reset reset.log and click on enter.
Once you have written all of the commands, you have to restart your PC and check whether the error has been fixed or not.
Method 9: Manually Entering The IP Information
As you know this error is only related to the IP configuration. So, you can solve it by entering the IP information manually. You are facing this issue because your WiFi network is not getting a valid IP configuration. So, by doing this, your issue may get solved. You are advised to follow the steps given below to enter the IP information manually:
Step 1: Firstly, you have to hold the Windows key and press R.
Step 2: Now, type ncpa.cpl there and press Enter key.
Step 3: Search for the network which is not working.
Step 4: Then, right-click on the network which you want to fix and select Properties.
Step 5: After that, select Internet Protocol Version 4 (TCP/IPv4).
Step 6: Click on Properties.
Step 7: Select Use the following IP addresses
Step 8: Now, enter 192.168.1.x in IP address (replace x with any number I replaced it with 10)
Step 9: Enter 255.255.0 in Subnet Mask
Step 10: Enter 192.168.1.1 in Default Gateway
Step 11: After that, click on the Use the following DNS server addresses
Step 12: Enter 8.8.8.8 in the Preferred DNS server
Step 13: Enter 8.8.4.4 in the Alternate DNS server
Step 14: Check the option which says Validate upon exit.
Step 15: At last, click on OK.
Method 10: Changing SSID And Password
Step 1: Start by pressing the Window + R key.
Step 2: Now, type cmd in the search bar and click on enter.
Step 3: Then, just type /ipconfig in the command prompt.
Step 4: After that, you have to check the IP Address which is written under the Default Gateway, and copy it.
Step 5: Open the browser and paste it.
Step 6: The login page of your router will appear on your screen. Log in from there and search for SSID and password settings.
Step 7: Change both of them from there.
Step 8: Check if the issue is resolved or not.
Conclusion
You are advised to go through the whole article given above. If you are also facing the same issue then you should try the solutions mentioned above and solve your problem. Hope it will help you.
