In today’s world, nearly everyone—even children and teenagers—uses a PC or laptop for school, college, or work purposes. Some customers, however, are encountering an error code 0x80070002 or 80070002 while using a computer or laptop.
If you’re experiencing the same problem, don’t worry. Problem number 0x80070002 is a typical Windows Update error.
Your computer or laptop may also display this error message with the 80070003 or 0x80070003 codes. Neither of the error codes is a different type of problem. If you’re having the same problem, you can remedy it by going through the remedies provided.
How Can Error 0x80070002 Be Repaired?
Please read on if you’re looking for information on how to fix the error number 0x80070002 or 0x80070003. You’ll find a variety of solutions to this problem right here. You don’t have to use all of the methods if you can solve your problem with only one, and that’s a good thing.
There are numerous ways to resolve this issue, some of which have been tried and found to be extremely beneficial by other users. As a result, you should give them a shot if you want to find a solution to your problem.
1.Date and Time settings should be checked.
2. Get rid of the Software Distribution folder
Why Is The Error 0x80070002 Occurring? The Windows Update Troubleshooter
When this error code 0x80070002 occurs, most people wonder why. The first thing you need to know is that the code you’re dealing with may vary depending on the operating system you’re using. Error code 0x80070002 can be found in Windows XP, as well. While using Windows 10/8/7, the error code 80070002 will be displayed.
While your Windows is reinstalling or updating, some files remain corrupted or missing, and even when that occurs, your Window is still updated. Because of this, your device may have issues.
To find a solution to your problem, use the following steps:
Method 1: Double-check the date and time on your computer.
Many Windows users have found this strategy to be extremely useful. Make sure your device’s date and time settings are correct in order to use this procedure. Possibly one of the main causes of this mistake. This error could be the result of a problem with the date and time settings on your computer or laptop. As a result, you should double-check the date and time.
Windows 7/8 users should follow these instructions:
Step 1: Changing the date and time is as simple as clicking on the Date and Time button located at bottom right of the screen.
Step 2: If the date and time on your Windows are accurate, then all that is left to do is to click on the OK button to save your changes.
Step 3: If the time zone on your PC is accurate, click on Change time zone, and then click on OK to finish. Finally, choose the Internet Time option at the top and then select Change Settings to make the changes.
Step 4: Next, make sure that the box next to “Synchronize with an Internet time server” is checked, then click “Update” and then “OK.” To finish, click OK to save your settings changes and exit the dialogue box.
Follow these procedures if you’re running Windows 10:
Step 5: In order to run Command Prompt as an administrator, you must first put cmd into the search box, then right-click on it and select Run as administrator from the menu that appears.
Step 6: w32tm/resync and the time, date, and w32tm/resync commands must all be entered into the window after that. Just keep in mind that it’s your responsibility to double-check your time and date settings before continuing.
You’ll then need to restart your computer or laptop and see if the problem has been resolved before trying to update Windows again.
Method 2: Modifying the Windows Update Installation Files
You can also attempt this way to resolve the issue. You may encounter problems with the system update process, resulting in the loss or corruption of important files. As a result, it is best to either remove or rename the files that have been installed.
Prior to making any changes, you should stop the Windows Update service so that you don’t lose the ability to rename or delete them. To use this approach, follow the procedures outlined below.
Step 1: Turn off Windows Update.
Initially, you need to hit the Windows logo key and the R key on your keyboard to bring up the Run box. You then need to enter services.msc and click on OK. Double-clicking Windows Update is now required (and if you are using Windows XP, then double click on Automatic Updates).
You can then set the Startup type of the computer back to Automatic. After that, make certain that the status of the service is set to Stop. In order to make the modifications permanent, make sure it’s not running and then click Stop, Apply, and OK to finish the process.
Step 2: The Software Distribution Folder must be removed
The easiest way to get started is to double-click on the drive that contains your copy of Windows, which is most likely C drive. Then, go to the Windows > SoftwareDistribution directory.
You must now remove the SoftwareDistribution folder from your computer. You can rename it to SoftwareDistributionOld if you don’t want to delete it. Close all the panes after that.
Step 3: Re-enable the Windows Update Service
Initially, you need to hit the Windows logo key and the R key on your keyboard to bring up the Run box. After that, you must type services.msc into the box and then click OK.
You must now double-click on Windows Update (or Automatic Updates if you are running Windows XP). To see if the problem has been resolved, you’ll need to restart your computer and reinstall Windows.
Method 3: Windows Update Troubleshooter can be used
This is a well-known technique for resolving a wide range of issues. This procedure can also be used to correct this problem.. To begin, go to Microsoft’s website and download the troubleshooter. It’s time to put it to the test. Next, click on Windows Update and then click on Next to complete the process.
After this, it will begin working on resolving your problem. You must restart your computer and try to update your Windows again after the process is complete.
Method 4: Use the Registry Editor
When upgrading your Windows, if you see this error, you should attempt this method.
However, before attempting this approach, make certain that your device’s Language setting is set to English (United States). Running Windows Media Creation Tool as an administrator is also recommended. Run it as an administrator by right-clicking and selecting the option. Once you’ve done that, follow the instructions below:
Step 1: Press Windows logo + R on your keyboard to get things started. Then, type Regedit and hit Enter and you’re done. After that, you must navigate to HKEY LOCAL MACHINESOFTWAREMicrosoftWindowsCurrentVersionWindowsUpdateOSUpgrade in order to perform the OS upgrade.
Step 2: Right-click an empty spot in Registry Editor’s left pane and select New, then select DWORD (32-bit) Value from the drop-down menu. Select the Modify option by right-clicking the newly created NewValue#1.
Step 3: AllowOSUpgrade should be renamed and then double-clicked in Value data, and the number should be entered.
Step 4: Click the OK button after you’ve selected Hexadecimal.
After that, restart your computer to see if the problem has been resolved.
Conclusion
It is highly recommended that all users read the article in its entirety to gain a thorough understanding of error 0x80070002. This error can be fixed using the methods and processes outlined above. If you’re having the same problem, then you should follow and attempt the procedures outlined above to find the best solution.