Windows Key Not Working On Windows 10 [SOLVED]

Using a Windows logo-emblazoned keyboard, you’ll find the Windows key. As a result of its numerous applications, having a problem with the key is extremely inconvenient. We’ve gathered 10 methods for resolving the Windows Key Not Working problem for you, in case you’re one of those unfortunates.

On Windows 10, how do you fix a problem with the Windows key?

If you keep getting the message “Windows key not working” and you’re becoming frustrated, you don’t have to be. This is where you’ll find the 10 ways to get out of this situation.

Method 1: A Malware and Virus Scan

Most computer problems stem from the presence of a virus or a form of malware. It’s usually a good idea to conduct a virus and malware scan on a regular basis. This can be done by downloading a decent Malware removal application, and if any suspicious files are found, they should be deleted.

The error Windows to key may not operate if there is malware present. Your Windows key can be disabled even if you’re infected with malware. In order to find out if any malware or virus has corrupted the files, you can use the following method:

Step 1: Open the Start Menu and choose Settings from the drop-down menu. Select Security and Updates from the Update and Maintenance drop-down menu.

Step 2: Find and click on Windows Defender in the update and security section. Shield Icon: The shield icon can be seen to your left of the screen. It’s time to get started.

Step 3: Using the Advanced scan, select the Full Scan option. Wait for the scan to finish.

Step 4: Verify if the Windows key not working error has been fixed after the scan and PC has been cleared of Malware. If it has, proceed to the next step.

Method 2: Reset Your Windows Registry

Windows key not working may be caused by a problem with your computer’s registry. When the Windows key doesn’t work, you can remedy the problem by altering your PC’s registry. You can do so by following the procedures outlined below.

When making changes to your registry, you should be careful because even a minor error can cause your hard drive to fail or possibly your entire computer to fail. As a result, it could cause the message Windows 10 file explorer won’t open. The registry should be exported and used as a backup, thus it is recommended that you do so.

Step 1: Go to the File menu in the Task Manager window

Step 2: Start a new job. After typing regedit on the command line, press Enter.

Step 3: Navigate to the HKEY LOCAL MACHINE/SYSTEM/CurrentControlSet/Control/Keyboard Layout key in the left pane

Step 4: Then, locate the Snapcode Map registry entry and delete it from the Layout key.

Step 5: After that, click the Exit button to close the Registry Editor window.

Step 6: Restarting your computer is the final step.

If the Windows key still doesn’t work, check to see if the problem has been resolved. If you are not satisfied with the results of this solution, you may want to consider the following options.

Method 3: Disabling the Gaming Mode

If you enjoy gaming and use a gaming keyboard frequently, there’s a good risk that it’s interfering with the Windows key’s functionality. One possible explanation for “Windows key not working” is this. Check to see if you’ve activated the game mode. You should turn it off if it’s on because it may be interfering with the Windows key’s function.

If you want to turn off the game mode, you’ll need to flip a switch. Your keyboard’s buttons will determine how you exit this mode. Use the instructions in your keyboard’s manual to disable the gaming mode in the correct manner.

Method 4: Examine the Win Lock Button (optional).

Using the win lock button, the Windows key can be disabled. Despite the fact that Gaming mode is enabled on many major message boards, there are still a few with the win lock button.

Make sure your keyboard has a win lock button by pressing it near the right ctrl button and see if that fixes any issues with your PC’s windows key.

Method 5: Creating a new account

The problem of the Windows key not working after creating a new user account was found to be fixed by several users. If your computer’s software is to blame for the problem, this should fix it. So, if this doesn’t work, you can try this solution.

Follow these procedures to register for a new account:

Step 1: Navigate to the settings menu, then click on the Account tab.

Step 2: Visit relatives and friends. Add someone else to this PC if you want to share this computer with your family and friends.

Step 3: The next step is to select a topic. In the event that you are unable to log in because you do not have the user’s credentials, click “Add a user without a Microsoft account.” Click Next to create a new user account. Create a new user account for yourself now.

Step 4: Sign out of your current account at this point in the process, and then proceed to the next step. After that, use the newly created account to access the website.

Step 5: Check to see if the issue “Windows key not working” occurs when you switch accounts in step 5. This new account can serve as your primary one if the mistake doesn’t occur. The new account might become your primary storage location by copying over your existing data.

Method 6: Perform a System File Checker Scan

You can use a system file checker to fix the problem of the Windows key not being installed properly. Your operating system’s files can become corrupted from time to time. As a result, your operating system is less than optimal. In order to find these corrupted files, conduct a system file checker scan.

Take the following steps to run a system file checker scan:

Step 1: Access the task list. Navigate to File Run new task in the menu bar.

Step 2: Open a new window to continue. You can type cmd and press enter to open the command line. If you check the box, this job will be created with administrative rights.

Step 3: Enter sfc scannow in the command prompt and hit Enter.

Step 4: Restart your computer after the scanning process is complete. Once you’ve fixed the problem, you’ll be able to fully utilise your PC again. Open the command prompt if the problem persists. Run the command DISM/Online/Cleanup-Image/RestoreHealth to restore the system’s health.

Take a look to see whether the problem has been resolved. Try a different Solution if the problem persists.

Method 7: Disable Bad Keyboard Drivers

Inappropriate keyboard drivers can cause the Windows key to not operate. Error fix: remove faulty keyboard driver and replace with appropriate one. You can accomplish it by following the solution as follows:

Step 1: In order to get the task manager open, you’ll first need to hit Ctrl, Shift, and Esc all at once. Then select File Run a new task from the menu bar to begin the process.

Step 2: Type devmgmt.msc in the run dialogue box and press Enter. You’ll be greeted with a device manager window.

Step 3: Expand the keyboard area in the device manager list. The keyboard driver can be removed by performing a right-click on it and selecting “Uninstall device” from the context menu that appears.

Step 4: Restart your PC or remove and re-plug your USB keyboard if you have one.. Reinstalling the drivers is done automatically by Windows. Take a look to see whether the problem has been resolved.

Method 8: Using Powershell Commands

Windows 10 components can be uninstalled via Powershell, a command-line interface. In certain cases, Powershell has solved the problem. Powershell commands can be used by following these instructions:

Step 1: When you press ctrl, shift and Esc at the same time on your keyboard, you’ll get to the task manager. Then, go to File>Run a new task and start a new one.

Step 2: When prompted, click “create this task with administrative privileges,” then select PowerShell. Then press the OK button.

Step 3: In the PowerShell window, type and press Enter, and then press the Enter key to begin.

“$($_.InstallLocation)AppXManifest.xml” is registered in each user’s Add-AppxPackage –DisableDevelopmentMode –Register”

Step 4: The problem of Windows keys not working will be solved after this procedure is completed.

Use this Solution at your own risk. PowerShell commands have the potential to alter the operating system. So if something goes awry, you should establish a new System Restore point so that you may restore your operating system to its previous state using Powershell commands if necessary.

Method 9:  restart Windows or File Explorer.

You may easily fix the error Windows Key is not working by restarting your Windows or file explorer. Use the following procedures to restart file explorer:

Step 1:When you press ctrl, shift and Esc at the same time on your keyboard, you’ll get to the task manager. In Windows, select the process tab and type “explorer” in the search field.

Step 2: Right-click Explorer and select End Task from the shortcut menu that appears. After that, select Run new task from the File menu.

Step 3: Type explorer.exe and hit Enter in the dialogue box that has opened.

See whether the problem is fixed now.

Method 10: Remove the Filter Keys

When the filter keys are activated, the Windows key may not function properly. So be sure to turn on or turn off your Filter Keys. If they are on, you should turn them off to see if this fixes the problem. To turn off the filter keys, simply follow the instructions listed below.

Step 1: Open the Start menu and click Settings. Select Ease of Access from the Settings menu, which may be found in the General section.

Step 2: Next, go to the keyboard tab, which is normally on the left.

Step 3: Find the filter keys by scrolling down the page. Disable the filtering keys.

Conclusion

Windows key not working can be fixed by following these 10 most common methods I sincerely hope that this helps you. If you are still unable to fix the problem, you can contact a nearby repair shop.