There Was A Problem Resetting Your PC

0
117
How To

Resetting the operating system can fix a multitude of problems with Windows. Windows 10 resets might fail, so it’s important to know what you’re getting yourself into. Error messages like “There Was A Problem Resetting Your PC” may pop up after or during the Windows 10 reset procedure. As a result of this problem, you may not be able to use Windows 10.

Microsoft has acknowledged that a fault in Windows 10 is to blame for this problem. For now, there are a few things you can do in order to get around the problem. Since Microsoft is aware of the defect, they have provided detailed instructions on how to avoid it.

How To

There are, however, a number of restrictions, such as:

1.Pre-installed with Windows 10 was not an upgrade from Windows 7 or Windows 8 on the computer you purchased.
2. When preinstalled apps are compressed by the PC maker, they take up less disc space.
3. You made a USB recovery drive using the Windows 10 “Create a recovery drive” function.
4. You booted your computer from the USB recovery disc and used the options Troubleshoot, Reset this Computer, and Remove Everything.
5. Resetting Your Computer Failed.

There are a number of ways to address this problem, including the following:

Method 1: Start-up Repair

Step 1: Your “USB recovery drive” must be connected to the computer in order to begin the process.

Step 2: Restarting your computer is the second step.

Step 3: When the command “Press any key to boot from device…” appears, press the appropriate key. abide by the instructions and push any key that is provided.

Step 4: If the bios doesn’t mention anything, you may have to alter the boot sequence. What you’ll need to accomplish is as follows.

1.When the manufacturer’s logo appears, you can press Esc, F8, F12, or F10. When you see the logo on the screen, push the button to choose between manufacturers.
2. When you push the button, the BIOS setup, BIOS setup utility, or Boot options will be shown. Your manufacturer may have a different location.
3. You will be presented with a variety of boot options when you pick Boot options. If you’re not sure which type of media you’re using, choose to boot from CD or DVD instead.
4. If you select BIOS Setup, you can use the arrow keys to get to the Boot section.
5. Get your USB recovery disc at the top of your boot list.
6. After saving the modifications, restart your computer.

Depending on the model of your computer, you may have access to a wide range of options. For precise directions, refer to your device’s user guide.

Step 5: Under the Install Windows screen, select “Repair your computer.” Opt for “Troubleshoot”. Take a look at “Advanced Options.”

Step 6: “Start-up Repair” is the final option.

Method 2: Recovering from a Lost Drive

Use this strategy if you are completely certain you will not be able to lose all of your personal data.

Step 1: Start by connecting your computer to the “USB recovery drive” described. Attempt to restart your computer.

Step 2: When the command “Press any key to boot from device…” appears, press the appropriate key. abide by the instructions and push any key that is provided.

Step 3: On the “Install Windows” tab, select “Repair your computer.”. Opt for “Troubleshoot”. Select “Advanced Options”

Step 4; “System Image Recovery” or “Recover from disc” should be selected . The next screen has directions for you to follow.

Method 3: Bootrec.exe can be used to fix Windows problems.

In spite of the fact that the use of bootrec.exe does not guarantee that your boot troubles will be resolved, it is absolutely worth trying.

Step 1: Start by connecting your computer to the “USB recovery drive” described in Step 1. Attempt to restart your computer. When the instruction “Press any key to boot from device…” is issued, the user is prompted to do so. abide by the instructions and push any key that is provided.

Step 2: Install Windows and then select”Repair your computer” in Step 2. Opt for “Troubleshoot”. Select “Advanced Options”

Step 3: In the third step, select “Command Prompt.” Press “Enter” after completing each step in the instructions below.

repair the boot sector with bootrec and fix the boot sector

./bootrec /repair

/scanos bootrec /

/rebuildbcd /bootrec

Step 4: Whether the problem persists, restart your computer and see if the technique works. Afterwards, you’ll be able to check if the booting operation was successful or unsuccessful.

Method 4: Command Prompt Reinstallation

When reinstalling Windows, this is the procedure to follow if you encounter a problem.

Step 1: Start by connecting your computer to the “USB recovery drive” described in Step 1. Attempt to restart your computer. When the instruction “Press any key to boot from device…” is issued, the user is prompted to do so. abide by the instructions and push any key that is provided.

Step 2: Install Windows and then select”Repair your computer” in Step 2. Opt for “Troubleshoot”. Select “Advanced Options”

Step 3: In the third step, select “Command Prompt.” After typing “notepad,” press “Enter.” In the drop-down menu, select “All Files” (in front of File Name).

Step 4: To get to Windows, you’ll need to discover the USB drive letter (such D or F) that’s being utilised. Enter the command “d:” in the command prompt.

Step 5: A command prompt will now open. Type “Setup” and press Enter to begin the installation process.

Step 6: The Windows installation tutorial should appear. Now, follow the on-screen directions to install Windows. You have the option of reinstalling it on top of your previous version or starting fresh.

Method 5: using the Command Prompt to run SFC and DISM

Corrupt Windows files or registry files may be to blame for this issue. SFC and DISM can be used from the command prompt to fix this issue. If you can’t get into Windows, you can still run an SFC scan from the surface of the operating system.

Step 1: Start by connecting your computer to the “USB recovery drive” described in Step 1. Attempt to restart your computer. When the instruction “Press any key to boot from device…” is issued, the user is prompted to do so. abide by the instructions and push any key that is provided.

Step 2: Install Windows and then select”Repair your computer” in Step 2. Opt for “Troubleshoot”. Select “Advanced Options” “Command Prompt” is the option.

Step 3: To begin, type in the command “sfc /scannow” and hit “Enter” to begin the scan. As a result, d: in “offbootdir=D:” refers to the drive where Windows is installed, whereas “d:windows” in “offwindir=D:windows” is a location for Windows files.

Step 4: important to keep in mind that the Windows drive letter is unique from what appears in your “My Computer.” For example, if your Windows is put on disc “C:” in Windows 10, 8 or 7, it will be on drive “D:.”

Step 5: After the scan has finished and the results have been displayed, move on to step 5. When the scan is finished, you will see two alternative messages: either that no errors were identified or that the problem was fixed.

Step 6: Please remember to run the scan at least three times to ensure that all of the information is accurate.

Step 7: The DISM tool should be performed after SFC, regardless of whether or not SFC found/resolved any issues. DISM will fix Windows if run from the installation disc. You may use the same command prompt to execute DISM if you follow these procedures.

Step 1: Command “mkdir c:mount” and then press “Enter” is the first step.

Step 2: In the second step, type “DISM.exe /mount-image /Image” and press Enter.

Step 3: Sourcesinstall.wim from d:sources /index:1

Step 4: Enter “dir:C:mount /readonly” one more time.

Step 5: Wait for the system to mount your image until it shows the message “mounting image” and then the “Operation finished successfully” message will appear.

Step 6: Using “dism.exe /Online” and “Cleanup-image /Restore Health” and pressing “Enter” is the next step.

Following the SFC scan, you should run it again to be sure. After the third SFC scan, restart your computer. You should be able to fix any corrupt Windows files with this method.

Method 6: Restore your computer to a previous point in time.

It’s also possible to use System Restore to fix the problem. However, if your machine does not have any System Restore points, this procedure will not help. Regardless of whether or not your computer contains System Restore points, you can still perform this method.

Step 1: Start by connecting your computer to the “USB recovery drive” described in Step 1. Attempt to restart your computer. When the instruction “Press any key to boot from device…” is issued, the user is prompted to do so. abide by the instructions and push any key that is provided.

Step 2: Install Windows and then select”Repair your computer” in Step 2. Opt for “Troubleshoot”. Select “Advanced Options” Now, select “System Restore” from the list.

StepThe next step is to follow the on-screen directions and select the Most Recent point.

Method 7: Perform a complete reinstallation of the operating system.

You can also use a USB or DVD to install a fresh copy of Windows if none of the other methods work. All you have to do is start the computer with the Windows installation discs in place. The installation medium (USB or DVD) will be launched and the drive will be formatted by hitting the corresponding key. To reinstall Windows, follow the onscreen instructions.

Conclusion

In this post, we’ll walk you through the simple steps you need to take to reset and fix any errors you experience on your Windows 10/8.1/ 8 machine.