Windows 10’s “Driver Power State Failure” notification on a blue screen can trigger fear. The good news is that you don’t have to go to a customer service centre to fix this problem anymore.
Incompatible drivers or power setting problems are the most common causes of the Driver Power State Failure error. In most cases, this error message is displayed when you put your computer to sleep. Around eight solutions are listed below, and we are confident that they will help you with this issue.
Solution 1: Turn off the power-saving mode.
The Driver Power State Failure problem can be fixed by changing the power settings.
Here are the steps to turn off the power setting:
Step 1: Control Panel can be opened by clicking the Start button and selecting Control Panel.
Step 2: Control Panel’s Power Options tab is where you’ll find this option.
Step 3: You can select “Balanced” or “Power Saver” from the two alternatives that are shown, and then click on “Change Plan Settings.”
Step 4: Select Advanced Power Settings, then find the Wireless Adapter Settings tab, expand it, and change the setting to Maximum performance from there.
Afterwards, reboot the computer.
Solution 2: Problematic Driver Uninstall
Because corrupted drivers may be to blame, it is necessary to examine the drivers and determine their current status. Device Manager is a good place to look for drivers. A yellow dot will appear alongside any drivers that are either inappropriate or corrupt. Remove the yellow-marked gadgets from your system. Uninstalling a driver is as simple as following these steps:
Step 1: Press the Windows logo key and X at the same time.
Step 2: Using the Menu, select “Device Manager.”
Step 3: Locate the Yellow Marked Devices.
Step 4: Uninstall the programme by selecting it with the right mouse button.
Step 5: To ensure that all devices are free of yellow marks, repeat steps 1 through 4.
Step 6: see if the Driver Power State Failure error is still present after the system has been reset.
Solution 3: A System File Checker scan (SFC)
During the SFC scan, all system files are examined. File versions that have been found to be corrupt are overwritten with their originals using this programme. SFC scans can be performed by following these steps:
Step 1: Start by typing cmd into the Start menu search box.
Step 2: Run it as an administrator in the second step.
Step 3: Type SFC/SCANNOW in the Command Prompt Window.
Step 4: Wait until you press the Enter key.
You should get a notification that reads “Verification is 100% complete.” After that, restart the computer.
Solution 4: Disabling the Sleep option
Driver Power State Failure error messages may no longer be displayed if you remove the sleep option from your computer. Fix the Driver Power State Failure issue by disabling the sleep option. Following these instructions will disable the Sleep option:
Step 1: To begin, go to the Start menu and select Control Panel from the list that appears.
Step 2: The next step is to open the Control Panel and pick the Power Options option.
Step 3: Select the Choose what the power button does tab from the left-hand column of options.
Step 4: Select “Change Unavailable Settings” from the drop-down menu.
The first step is to turn off the sleep option. Disable the Hibernate option as well.
Solution 5: Uninstalling Antivirus Software
Antivirus software, like our greatest friends, can present troubles from time to time. To begin, turn off your antivirus software and do a manual check. In order to fix the problem, it is necessary to remove the antivirus programme. Uninstall the antivirus programme using a reputable removal tool.
Solution 6: Uninstalling Graphics Card Driver Updates
The majority of the time, we maintain our drivers up to date, although Driver Power State Failure errors can arise as a result of updating them. Uninstalling the latest updates:
Step 1: The first step is to press the Windows logo key and the X together.
Step 2: Using the Menu, select “Device Manager.”
Step 3: Find and double-click on the Display Adapters option.
When the properties box has opened, select the Driver tab and then Roll Back Driver.
Solution 7: Enable the Nvidia Control Panel’s Maximum Performance setting
Driver Power State Failure can be fixed using this method, however it drains the battery more quickly. Change the power setting in the Catalyst Control Center if you have AMD graphics. How to get the most out of your abilities:
Step 1: To begin, open Control Panel by clicking on the start icon.
Step 2: Select the Nvidia Control Panel option from the Control Panel window in the second step.
Step 3: Click on the Manage 3D Settings option in the left pane to access this feature.
